Function esp_idf_sys::ledc_set_duty_with_hpoint

pub unsafe extern "C" fn ledc_set_duty_with_hpoint(
    speed_mode: ledc_mode_t,
    channel: ledc_channel_t,
    duty: u32,
    hpoint: u32
) -> esp_err_t

@brief LEDC set duty and hpoint value Only after calling ledc_update_duty will the duty update. @note ledc_set_duty, ledc_set_duty_with_hpoint and ledc_update_duty are not thread-safe, do not call these functions to control one LEDC channel in different tasks at the same time. A thread-safe version of API is ledc_set_duty_and_update @note For ESP32, hardware does not support any duty change while a fade operation is running in progress on that channel. Other duty operations will have to wait until the fade operation has finished. @param speed_mode Select the LEDC channel group with specified speed mode. Note that not all targets support high speed mode. @param channel LEDC channel (0 - LEDC_CHANNEL_MAX-1), select from ledc_channel_t @param duty Set the LEDC duty, the range of duty setting is [0, (2**duty_resolution) - 1] @param hpoint Set the LEDC hpoint value(max: 0xfffff)

@return - ESP_OK Success - ESP_ERR_INVALID_ARG Parameter error